Diagnosing Inter-VLAN Print Failures
A company recently segmented its flat network into two VLANs: VLAN 10 for workstations and VLAN 20 for printers. A router on a stick provides inter-VLAN routing. After the change, a workstation in VLAN 10 cannot print to a printer in VLAN 20.
A network technician verifies that the workstation can successfully ping the router’s VLAN 10 subinterface, and the printer can successfully ping the router’s VLAN 20 subinterface.
The technician considers two approaches to diagnose the fault: Approach 1 is to verify the workstation’s ARP table to ensure it has resolved the printer’s MAC address. Approach 2 is to verify the router’s access control lists (ACLs) to ensure traffic is permitted between the VLAN 10 and VLAN 20 subnets.
Which approach is more appropriate for diagnosing this specific fault, and why?
Approach 2 is more appropriate because the router must translate the workstation’s private IP address to a public IP address to reach the printer.
Approach 1 is more appropriate because the workstation must resolve the printer’s MAC address directly to encapsulate the print job.
Approach 1 is more appropriate because the router on a stick configuration bridges the two VLANs into a single broadcast domain.
Approach 2 is more appropriate because the workstation and printer are on different subnets, so their traffic must pass through and be permitted by the router.
Question Leaderboard
Not enough data yet to show leaderboard.
