Resolving Wireless Interference in an Open Office
A company is deploying a wireless network in a large open-plan office. To ensure complete coverage, three wireless access points (APs) are installed evenly across the ceiling. All three APs are configured with the same SSID and are set to broadcast on the 2.4 GHz band using Channel 6.
Shortly after deployment, employees report slow network speeds and frequent disconnects, especially when sitting in areas where the signals from two APs overlap. A technician verifies that the APs have sufficient wired backhaul capacity and are not experiencing hardware faults.
Which configuration change should the technician apply to the access points to best resolve the reported issue?
Change the SSID on each access point to be unique so client devices are forced to choose only one access point.
Increase the transmit power on all three access points to maximum to overpower any external sources of interference.
Assign each access point to a different non-overlapping channel, such as 1, 6, and 11, to minimize co-channel interference.
Disable the 2.4 GHz band and configure all three access points to use Channel 6 on the 5 GHz band.
Question Leaderboard
Not enough data yet to show leaderboard.
