Unknown Unicast Flooding
A network technician is analyzing traffic on a managed Layer 2 switch configured with a single VLAN (VLAN 20). Host A is connected to Port 1, and Host C is connected to Port 3. Host B is connected to Port 5, but has not sent any frames since the switch was last rebooted.
Host A sends a unicast Ethernet frame destined for Host B’s MAC address. The switch’s current MAC address table is shown below.
| VLAN | MAC Address | Port |
|---|---|---|
| 20 | 00:1A:2B:3C:4D:5E (Host A) | 1 |
| 20 | 00:1A:2B:3C:4D:7F (Host C) | 3 |
Based on the provided evidence, what will the switch do when it receives the unicast frame from Host A destined for Host B?
It will send an ARP request out of all ports to discover Host B’s MAC address.
It will drop the frame because Host B’s MAC address is missing from the table.
It will flood the frame out of all active ports assigned to VLAN 20 except Port 1.
It will forward the frame exclusively to the default gateway port for routing.
Question Leaderboard
Not enough data yet to show leaderboard.
