VLAN ARP Traffic Handling
A network technician is troubleshooting connectivity between two workstations, Host A and Host B, connected to the same managed Layer 2 switch. Both hosts are configured to be in VLAN 20.
The technician observes that when Host A sends an ARP request to resolve Host B’s MAC address, the switch forwards the broadcast frame out of all active ports assigned to VLAN 20, except the port where the frame was received. Host B receives the ARP request and replies with a unicast frame.
Based on the described evidence, how will the switch handle Host B’s unicast ARP reply?
The switch will flood the unicast reply out of all ports in VLAN 20 because ARP replies are always broadcast to ensure all hosts update their ARP caches.
The switch will forward the unicast reply to the default gateway, which will then route it back to Host A on VLAN 20.
The switch will forward the unicast reply only out of the port connected to Host A, assuming Host A’s MAC address was learned when the initial ARP request was received.
The switch will drop the unicast reply because ARP traffic is not permitted inside a switched VLAN without a router.
Question Leaderboard
Not enough data yet to show leaderboard.
