Inter-VLAN Routing and ACLs
A corporate network has three VLANs: VLAN 10 (Sales), VLAN 20 (Engineering), and VLAN 30 (Servers). A Layer 3 switch routes traffic between the VLANs.
An Access Control List (ACL) on the Layer 3 switch is configured to allow VLAN 10 and VLAN 20 to access VLAN 30, but explicitly denies traffic directly between VLAN 10 and VLAN 20.
A network technician captures traffic on the trunk link connecting a Layer 2 access switch to the Layer 3 switch.
| Frame | Source MAC | Dest MAC | 802.1Q Tag | Source IP | Dest IP |
|---|---|---|---|---|---|
| 1 | MAC-A (Sales PC) | MAC-GW (L3 Switch) | 10 | 192.168.10.5 | 192.168.30.10 |
| 2 | MAC-B (Eng PC) | MAC-GW (L3 Switch) | 20 | 192.168.20.8 | 192.168.10.5 |
| 3 | MAC-GW (L3 Switch) | MAC-A (Sales PC) | 10 | 192.168.30.10 | 192.168.10.5 |
Based on the traffic capture and the network description, what will happen to Frame 2 after it reaches the Layer 3 switch?
The Layer 3 switch will drop the packet because the ACL denies traffic between VLAN 20 and VLAN 10.
The Layer 3 switch will flood the frame out all ports on VLAN 20 because the destination IP is on a different subnet.
The Layer 3 switch will forward the frame to VLAN 30 because all inter-VLAN traffic must pass through the server VLAN.
The Layer 3 switch will strip the VLAN 20 tag, add a VLAN 10 tag, and forward the frame to the Sales PC.
Question Leaderboard
Not enough data yet to show leaderboard.
